Egyptian limestone rectangle steppers with an acid-washed surface and straight sawn edges, supplied in 800 x 400 x 30mm and 600 x 400 x 30mm. The true-cut rectangle gives consistent joint widths and a formal, linear paving line, in contrast to the organic oval steppers cut from the same stone. The acid wash adds texture and character while the neutral cream limestone tone stays cooler underfoot than dark basalt or bluestone. Available loose by the piece or in full crates of 32 and 54.
Key Features
- Egyptian limestone, 30mm thick - rated for pedestrian and light domestic foot traffic
- Cut to a true rectangle - consistent joint widths, no cutting on site
- Acid-washed surface with straight sawn edges - textured underfoot, formal in appearance
- 3.13 pieces per m2 at 800 x 400mm, 4.17 per m2 at 600 x 400mm
- Approximately 25kg and 19kg per piece - single-person handling
- Pairs with the Egyptian Limestone Oval Stepper in the same stone and finish
- Available loose or by the crate - crate pricing sits 10% below the each rate
Applications
- Courtyards and alfresco entertaining areas
- Garden paths and formal walkways
- Patio and paved feature areas
- Pool surrounds where a structured layout is wanted
- Residential and commercial outdoor paving
Specifications
- Material: Egyptian limestone
- Finish: Acid washed, straight sawn edges
- Colour: Neutral cream limestone
- Thickness: 30mm
- Sizes: 800 x 400 x 30mm and 600 x 400 x 30mm
- Weight: approx 25kg and 19kg per piece respectively
- Coverage: 3.13 pieces per m2 (800x400) and 4.17 pieces per m2 (600x400)
- Crate quantities: 32 pieces (approx 10.2m2) and 54 pieces (approx 12.9m2)
Installation and Care
- Lay on a properly prepared, level base with correct falls for drainage
- Set consistent joint spacing - the true-cut edges hold a clean line
- Compacted road base or sand bedding, depending on the application
- Clean with water and a stiff broom; a stone sealer is optional for stain resistance
Egyptian limestone rectangle steppers with an acid-washed surface and straight sawn edges, supplied in 800 x 400 x 30mm and 600 x 400 x 30mm. The true-cut rectangle gives consistent joint widths and a formal, linear paving line, in contrast to the organic oval steppers cut from the same stone. The acid wash adds texture and character while the neutral cream limestone tone stays cooler underfoot than dark basalt or bluestone. Available loose by the piece or in full crates of 32 and 54.
Key Features
- Egyptian limestone, 30mm thick - rated for pedestrian and light domestic foot traffic
- Cut to a true rectangle - consistent joint widths, no cutting on site
- Acid-washed surface with straight sawn edges - textured underfoot, formal in appearance
- 3.13 pieces per m2 at 800 x 400mm, 4.17 per m2 at 600 x 400mm
- Approximately 25kg and 19kg per piece - single-person handling
- Pairs with the Egyptian Limestone Oval Stepper in the same stone and finish
- Available loose or by the crate - crate pricing sits 10% below the each rate
Applications
- Courtyards and alfresco entertaining areas
- Garden paths and formal walkways
- Patio and paved feature areas
- Pool surrounds where a structured layout is wanted
- Residential and commercial outdoor paving
Specifications
- Material: Egyptian limestone
- Finish: Acid washed, straight sawn edges
- Colour: Neutral cream limestone
- Thickness: 30mm
- Sizes: 800 x 400 x 30mm and 600 x 400 x 30mm
- Weight: approx 25kg and 19kg per piece respectively
- Coverage: 3.13 pieces per m2 (800x400) and 4.17 pieces per m2 (600x400)
- Crate quantities: 32 pieces (approx 10.2m2) and 54 pieces (approx 12.9m2)
Installation and Care
- Lay on a properly prepared, level base with correct falls for drainage
- Set consistent joint spacing - the true-cut edges hold a clean line
- Compacted road base or sand bedding, depending on the application
- Clean with water and a stiff broom; a stone sealer is optional for stain resistance