Left Continue shopping
Your Order

You have no items in your cart

The Versaloc 200 Series Standard Unit is the main body block in Adbri's mortarless dry-stack walling system. It is a 400 x 190 x 200mm concrete block with interlocking tongue-and-groove sides and locating lugs on top, so once the first course is mortared level the rest of the wall simply stacks - no mortar, no glue, no adhesive. It is used for retaining walls, garden and planter walls, steps, boundary and shed walls, and fire pits. Dry-stacked on its own it builds to 600mm plus cap; core filled and steel reinforced to an engineer's design it goes to 2.6m as a retaining wall.

Key Features

  • Mortarless dry-stack - only the first course is mortared, every course above locks on
  • Tongue-and-groove side joints plus self-locating top lugs hold line and level
  • Builds unreinforced retaining walls to 600mm + cap (3 courses) with no engineering
  • Core filled and steel reinforced, the same block goes to 2.6m retaining
  • 20 MPa minimum compressive strength, manufactured to AS 4455.1
  • 3-hour fire rating (FRL 240 min) and Rw 56+ acoustic when fully core filled
  • Roughly double the laying rate of mortared blockwork (~400 units/day vs ~200)
  • 12.5 blocks per m2, 72 per pallet - easy to quantify and order

Specifications

  • Material: Concrete
  • Dimensions: 400 x 190 x 200mm
  • Weight: 15.65kg each
  • Coverage: 12.5 blocks per m2 of wall face
  • Pallet quantity: 72 units

Versaloc 200 Series Standard Block

$6.95
GST included
Minimum quantity allowed is .
Maximum quantity allowed is .
The product can be bought in quantity increments of .

Your Landscape Calculations

  1. Example Area 1 - 116 m²
  2. Example Area 2 - 80 m²
Remaining Turf Area: 0 m²
Tip: Add up to 10% extra to allow for cuts and waste.

The Versaloc 200 Series Standard Unit is the main body block in Adbri's mortarless dry-stack walling system. It is a 400 x 190 x 200mm concrete block with interlocking tongue-and-groove sides and locating lugs on top, so once the first course is mortared level the rest of the wall simply stacks - no mortar, no glue, no adhesive. It is used for retaining walls, garden and planter walls, steps, boundary and shed walls, and fire pits. Dry-stacked on its own it builds to 600mm plus cap; core filled and steel reinforced to an engineer's design it goes to 2.6m as a retaining wall.

Key Features

  • Mortarless dry-stack - only the first course is mortared, every course above locks on
  • Tongue-and-groove side joints plus self-locating top lugs hold line and level
  • Builds unreinforced retaining walls to 600mm + cap (3 courses) with no engineering
  • Core filled and steel reinforced, the same block goes to 2.6m retaining
  • 20 MPa minimum compressive strength, manufactured to AS 4455.1
  • 3-hour fire rating (FRL 240 min) and Rw 56+ acoustic when fully core filled
  • Roughly double the laying rate of mortared blockwork (~400 units/day vs ~200)
  • 12.5 blocks per m2, 72 per pallet - easy to quantify and order

Specifications

  • Material: Concrete
  • Dimensions: 400 x 190 x 200mm
  • Weight: 15.65kg each
  • Coverage: 12.5 blocks per m2 of wall face
  • Pallet quantity: 72 units

Delivery Direct To Site

A delivery charge of $125 (incl. GST) applies to orders under 3 tonnes, with extra freight charged outside the local metro area depending on distance and load weight.

Pallets must be collected after delivery.